Land Rover Defender Winch Bumpers

REMEMBER TO ADD AN ORE STAINLESS BUMPER FITTING KIT: Click here to Order

We’re proud to launch our highly-anticipated Defender Winch Bumper after months of design, development and testing! At this time, the ORE4x4 UK winch bumper is the only model on the market large enough for the Warrior T1000 Military-Application Winch with a wider than usual winch tray. Of course, all of our Winch Bumpers benefit from our signature OREsome Powdercoating system tested to withstand a unique 1000hr salt-spray corrosion test. Based on feedback from fellow enthusiasts at the Land Rover Owner show, we added two towing eyes to the winch tray which are coated with a red variant of our OREsome powder coating. For models purchased with daytime running lights, we’ll include two backplates to prevent mud from flicking up from the tyres and compacting onto the lights, causing them to overheat.

• Detatchable ends allow you to replace if damaged or to change styles if you prefer
• Available with either Straight or Cranked ends
• Available with our without Ring Automotive daytime running lights (DRLs)
• Available with our without the infamous ORE bumper fixing kit
• Featuring a 3mm Mild steel construction
• 2x OREsome coated red recovery points included (21mm diameter)
• Perfectly formed ends! we spent some serious time developing our tooling and fine tuning our manufacturing processes to create perfectly formed ends. (Most bumpers on the market have either step folded ends or welded on ends and the ground back welds can be seen under the coating)
• Mounting tabs are all part of the same single piece of steel which provides neater slick finish as all from a single profile/piece of stee and no welded on mounting tabs meaning no gaps for moisture or dirt to hide and accelerate coating damage/degradation
• Stiffeners welded in either side of mounting tabs for added strength (these are also positioned to allow good access for the coating nozzle for best proactive of even application and to allow good access for jet-washing and mud and general road debris that may build up or settle in there – again giving the coating system the best chance of staying in-tact

For bumpers with Daytime Running Lights (DRL’s)

• We used only the highest quality daytime running lights from Ring Automotive
  • Provides an intense, bright beam of light
  • Complete with ‘fast fitting kit’ for automatic lights on and off
  • Improves vehicle visibility and reduces risk of accidents in daylight hours
  • Fitted with 5 x 1.5W ultra bright LEDs
  • IP65 rating
  • The Ring BRL0397 is a daytime running lamp that is ‘E’ approved with ultra bright 5 x 1.5W LEDs. The Aurora is 150mm wide and provides a narrow, intense beam of light. DLRs improve vehicle visibility and reduce the risk of accidents in daylight hours. IP65 rating.
  • Universal fitting – these lights can be purchased from popular auto parts distributors
  • For more information & instructions, please refer to: https://www.ringautomotive.com/en/product/BRL0397
• Precision mounting brackets formed part of stiffer plate to protect light housing and profide a strong mounting for the light
• Stainless studs welded in mounting points to mount the lights
• Stainless replacement brackets for to the ring units 2mm instead of the 1mm brackets (also means theres no issues with powder coated brackets supplied by others
• Light mountings have a protective cover plate to stop direct impact from debris and road salt on to back of light from front wheels.